Bassbone OD™ Specifications

The Bassbone OD is designed for bass. Although it will likely work well with any instrument, when you look at the total harmonic distortion at 20Hz, you can truly appreciate why so many artists find the sound to be fat and warm in the all-important bottom end. As a pedal with built-in distortion, reading specs is almost irrelevant. What is important is how it sounds when plugged in.

Audio circuit type:  Discrete class-A FET input with low noise ICs.
Frequency response:  20Hz ~ 18kHz
Total harmonic distortion:  0.05% @ -15dBu
Intermodulation distortion:  0.2% @ -20dBu 
Dynamic range:  85dB
Input impedance: Input A:  220K/10M
Input impedance: Input B:  Variable from 22K to 1.8M
Output impedance: 300 Ohms at XLR
Maximum input:  +7 dBu
Gain:  Unity gain device 
Gain - boost drive:  0 to 25 dB 
Gain - PZB boost:  +10dB on channel A 
Clip level output:  +10dBu at XLR
Noise floor:  -100dB
Equivalent input noise::  -92dBu at XLR
Audio Connections: ¼" Output High-Z instrument-level
3.5mm output Headphone, mono with volume control
Balanced mic level XLR output, AES standard (pin-2-hot)
Controls:  Gain, Low, Mid & High X2. Drive, Mix, Tone in OD, Drag 
Switches:  PZB, Blend, FX 180, XLR G/L & 180, LOOP Mode, EFX mode, HPF X 2, Mid Frequency x 2
Low-cut filter:  Flat, 80Hz and 150Hz
Filter slope: 6 dB/Octave
Merge function:  Recessed Blend switch mixes ch-1 & ch-2 together 
XLR configuration:  Pin 2 +, Pin 3 -, Pin 1 Ground 
Ground lift: Lifts pin-1 on the XLR
Power:  +15VDC/400mA adapter included
Construction:  14 gauge steel
Finish: Powder-coat
Size: (L x W x D) 8" x 4.2" x 2" (203 x107 x 48mm)
Weight:  2.55lb (1157 grams)
Shipping Size: (L x W x D): 10.75" x 5"x 2.75" (273 x 127 x 70mm)
Shipping Weight: 2.8lb (1270 grams)
Conditions: For use in dry locations only between 5°C and 40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.