PZ-PRE SPECIFICATIONS

The Radial PZ-Pre is a high performance preamp designed specifically for acoustic instruments and pickups of all sorts. A proprietary response curve has been developed that works in conjunction with the passive-interactive tone controls and piezo optimized front end to produce a warm yet detailed sonic signature. Exceptionally low noise and distortion differentiate the PZ-Pre from others producing a natural tone that will flatter most instruments of all types.

Specifications  
Specifications are subject to change without notice.
Circuit Type: Proprietary active circuit
Standard input impedance: 6.8k Ohm at input jack ('PZB' switch out)
Input with PZB switch in Impedance: 10meg Ohm at input jack
Output Impendence: 1k Ohm
Low cut roll-off:

Position 1: 75Hz

Position 2: 2:220Hz

Notch Freq. range: 56Hz to 330Hz
Notch Q:

Setting 1: -8dB

Setting 2: -15dB

EQ

LOW
Shelving
+/- 12dB @ 75Hz

MID
Parametric
+/- 12dB @ 82Hz to 5.6kHz

HIGH
Shelving

+/- 12dB @ 7.5kHz

Boost level 12dB
Effects send & receive -10dB
FX loop impedance

Send: 1k Ohm

Receive: 15k Ohm

Polarity 180° switch (absolute phase reversal)
Connections Input-1: ¼" unbalanced
Input-2: ¼" unbalanced
Insert Send/Receive: ¼" unbalanced
Amp output: ¼"unbalanced, Hi-Z, 1k Ohm
Tuner output: ¼"unbalanced, Hi-Z, 6.8k Ohm
Pre-EQ output: XLR balanced mic level 600 Ohms
Post-EQ output: XLR balanced mic level 600 Ohms
Footswitches Three: Mute, Boost, Toggle 1-2
Heavy-duty high-cycle switches
LED indicators Large 3mm OD ultra-bright LED indicators for:
mute, boost, Ch-1 & Ch-2 toggle status
Construction
14 guage steel, baked enamel finish
Size
8"w x 4 ¼"d x 2"h (205 x 110 x 51mm)
Weight
2.7lbs (1.2kg)
Warranty
Radial 3-year limited warranty
Power Supply:
15VDC 400mA, center pole positive

Part # R800 9407 00 - 120 volt
Part # R800 9407 01 - 230 volt
 Part # R800 9407 02 - 230 volt
Part # R800 9407 03 - 100 volt
Part # R800 9407 04 - 240 volt

USA, Canada, Taiwan
Continental Europe
United Kingdom
Japan
Australia