Twinline™ Specifications

The Twinline is an effects loop router that may be remotely switched to follow the active amplifier in an advanced stage setup. This enables the pedalboard or effects rack to utilize the two amplifier rear-panel effects loops while sharing the same effects. The circuit design is optimized to work from -30dB to +10dB, providing plenty of range for both guitar pedals and professional studio effects while introducing minimal artefact.


Specifications   
Audio Circuit Type:  Class-A FET with transformer isolation
Dynamic Range:  105dB 
Gain - From Amp Jack to EFX Send:  Variable from -2.7dB ~ +3.6dB
Equivalent Input Noise:  -103dB
Noise Floor:  -92dBu
Intermodulation Distortion:  0.01%
Common Mode Rejection Ratio:  91dB @ 55Hz
Maximum Input - From Amp Jack:  +25dBu 
Maximum Input - FX Input:  +8dBu
Total Harmonic Distortion:  0.005% @ 1kHz
Input Impedance - From Amp:  10KΩ 
Output Impedance - To Amp:  2200Ω
Input Impedance - FX Return:  1MΩ 
Output Impedance - FX Send:  1KΩ
Unity Gain Control Position:  About 10 O'Clock on send & return EFX
Features   
Controls: Send & return gain for amps A & B
Switches:  180° polarity reverse on each effect loop
Input/Output Connections:  Balanced ¼" TRS or unbalanced ¼"
Ground Lift:  Both inputs and on the FX loop 
Remote Controls:  Slingshot contact closure in/out
General   
Construction:  14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size (W x H x L): 4.3" x 1.9" x 5.8" (10.9cm x 4.8cm x 14.7cm)
Weight:  2.4lbs (1.1kg)
Shipping Size (W x H x L): 4.7" x 2.6" x 11.6" (11.9cm x 6.6cm x 29.4cm)
Shipping Weight: 3.4lbs (1.54kg)
Power:  15V 100mA Unregulated/Center Pin Positive
Conditions: For use in dry locations only between 5°C and 40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.